Have you ever faced a plumbing problem that ruined your day? Maybe your faucet was dripping, your drain was blocked, your toilet was running, or your shower was weak. You wanted to fix it yourself, but you didn’t know how. You didn’t want to spend money on a plumber, but you also didn’t want to live with the problem. Well, don’t worry. We have some easy and effective DIY plumbing hacks that can help you solve some of the most common plumbing issues at home. But if you don’t want to get your hands dirty while performing plumbing, it’s always wise to choose Professional Plumbing Service Providers
5 Super Easy & Useful DIY Plumbing Hacks
1. Stop Your Toilet From Running
A running toilet is not only annoying, but also wasteful and expensive. It can waste up to 200 gallons of water per day and increase your water bill significantly. One of the main causes of a running toilet is a faulty flapper valve, which is the rubber seal that stops the water from flowing into the bowl after each flush.
To fix this, you can try adjusting the chain that connects the flapper to the flush handle, or replacing the flapper with a new one. Another possible cause is a leaky fill valve, which is the device that controls the water level in the tank.
Besides that, you can also try cleaning or replacing the fill valve, or adjusting the float arm that regulates the water level. You can also use food colouring to test for leaks in your toilet tank. Just add a few drops of food colouring to the tank and wait for 15 minutes. If you see any colour in the bowl, you have a leak.
Also Read: 5 Common Plumbing Issues That You Need To Know About
2. Unclog Your Garbage Disposal
Garbage disposals are great for getting rid of food waste, but they can also get jammed, clogged, or smelly over time. To fix a jammed disposal, you can try using an Allen wrench to manually turn the blades from underneath the unit or using a wooden spoon or plunger to dislodge any stuck objects from above. If your disposal is clogged, you can try running hot water and dish soap through it or using baking soda and vinegar to create a fizzing reaction that can loosen any debris. And if you’re dealing with a smelly disposal, grinding some citrus peels, ice cubes, or baking soda can help freshen up the smell.
Also Read: 5 Common Plumbing Issues That You Need to Know About
3. Clear Your Sink Drain
Sink drains can get clogged by hair, soap scum, grease, and other materials that accumulate over time. To clear your sink drain, you can try using a plunger, a drain snake, or a coat hanger to pull out any obstructions. You can also try using baking soda and vinegar, or boiling water and salt, to dissolve any grease or organic matter . Another DIY plumbing hack is to use wet/dry sandpaper to remove any hard water stains or mineral deposits from your chrome faucets or shower heads.
4. Boost Your Shower Pressure
A low shower pressure can make your bathing experience less enjoyable and less efficient. One of the main reasons for low shower pressure is a clogged shower head, which can be caused by hard water deposits, rust, or dirt. To boost your shower pressure, you can try soaking your shower head in vinegar overnight, or using a toothbrush or a needle to clean the holes. You can also try replacing your old shower head with a new one that has more holes or different spray patterns.
5. Clean Your Water Heater
A water heater is an essential appliance that provides hot water for your home. However, over time, sediment and minerals can build up inside the tank and reduce its efficiency and lifespan. To clean your water heater, you can follow these steps:
- Turn off the power and gas supplies to your water heater.
- Attach a garden hose to the drain valve at the bottom of the tank.
- Open the drain valve and let the water flow out until it runs clear.
- Close the drain valve and refill the tank with cold water.
- Turn on the power and gas supply to your water heater.
Cleaning your water heater once a year can help prevent corrosion, improve performance, and extend its life.
Crux
You don’t have to call a plumber for every minor plumbing problem. In this blog, we have covered 5 DIY hacks to fix common plumbing issues like leaky faucets and clogged drains using things you already have at home. These DIY plumbing hacks can help you save time and money and keep your home running smoothly. But remember, some problems are too big or tricky for you to handle alone. If you’re uncertain about fixing something or if it appears hazardous, prioritise your safety by booking a Professional Plumbing Service instead. Thus, you can avoid making things worse or hurting yourself. By following these tips, you can solve simple plumbing problems on your own and enjoy a hassle-free home
